fbpx
10.2 C
Sydney
Monday, May 20, 2024

Buy now

  • HihkVision Colour Vu
  • HIKVISION
  • GOOGLE WALLET
HomeSecurityAccess ControlIR Cut Filter or Night Mode in Software – Which is Best?

IR Cut Filter or Night Mode in Software – Which is Best?

10.2 C
Sydney
12.4 C
Brisbane
1.7 C
Canberra
25.4 C
Melbourne

RECOMMENDED

WEATHER

Sydney
clear sky
9.9 ° C
12.6 °
6.3 °
66 %
4.6kmh
0 %
Sun
10 °
Mon
17 °
Tue
17 °
Wed
16 °
Thu
17 °

Latest Articles

STAY CONNECTED

2,468FansLike
1,400FollowersFollow
0FollowersFollow

Q: What is the infrared cut filter, what role does it play in a CCTV camera and do I need a day/night camera? I’ve heard of cameras that don’t need a cut filter but handle this task in software. Which is better? 

A: Unlike the human eye, camera sensors can see infrared during the day – this impacts on the appearance of colour – green plants turn pink, for instance. In order to match the appearance of human vision, the cut filter only allows the visible light spectrum to pass, reflecting infrared using coatings that reflect or absorb IR wavelengths. 

With the CMOS sensors prevalent today, reflective filters are best. These are typically short-pass interference types that bounce IR wavelengths exceptionally well. At night, however, you’re going to want to sense every photon you can at whatever wavelength. Given the camera has gone into monochromatic night mode, pulling the reflective IR cut filter out of the way allows high efficiency sensing of available light, as well as the ability to leverage integrated or adjacent IR light sources. 

As you say, some IP cameras undertake night mode in software – they have a fixed cut filter that handles IR in day mode and at night their processors combine red, blue and green pixel signals into white light. The results are 2-fold. A brighter monochromatic image in low light (brighter than the colour image) and a less expensive build. Frankly, I would be wary of software-based night mode. You can only combine red, blue and green if your sensor is discerning red, blue and green and at under 10 lux with a low grade sensor, there’s not going to be much discerning of anything at all. 

What is going to be happening is that the digital brightening (amplification) taking place as the barely existent colour pixel signals exit the sensor is the generation of lots and lots of noise by the camera's processing engine. Brightening by adding noise can provide more detail by increasing regional contrast but only if the detail is there to begin with and only to a certain point. Other things to consider are that as noise increases recording sizes blow out and that software-based day/night cameras are not sensitive to IR, so you lose that as well. 

We’d be buying quality IR-supported day/night cameras for use in sub-10 lux. After all, there’s no point installing a solution that doesn’t meet your client’s operational specifications, no matter how cheap it is. ♦

SecTech signature 2017 1

AUTHOR

SEN News
SEN Newshttps://sen.news
Security & Electronics Networks - Leading the Security Industry with News and Latest Events. Providing information and pre-release updates on the latest tech and bringing it all to you daily. SEN News has been in print for over 20 years and has grown strong as a worldwide resource in digital media.

LEAVE A REPLY

Please enter your comment!
Please enter your name here