Jack Fuse Waterproof ARK For ATMOD Terminations.
Jack Fuse Waterproof ARK For ATMOD – ARK is an ATMOD ruggedisation kit that adds permanent weather resistance, as well as increasing the strength of Jack Fuse ATMOD terminations.
According to Jack Fuse’s Ken McKeon, an ARK pack can protect 8 ATMOD terminations and is suitable for figure 8, 4-core and 6-core security cables. The pack includes tough polyolefin tubing lined with adhesive, 8 large tubes to cover the ATMOD and security cable and 16 small tubes to seal smaller conductors.
To install, you Place the protective tubes over the cables/conductors, terminate the ATMOD as normal then slide the tubes over the ATMOD and conductors to create a single sealed tube. You then apply heat with a heat gun or other suitable heat source taking care not to burn the tubing.
ATMOD quick connect EOL resistors eliminates common termination faults and cut installation costs. ATMOD combines a robust pre-made EOL resistor network with secure push-in connectors.
EOL circuit installation becomes as simple as stripping the alarm cable and pushing it securely into the ATMOD connectors and it takes far less time than building traditional resistor circuits.
You can learn more about Jack Fuse ATMOD quick terminations here or read more SEN news here.
“Jack Fuse Waterproof ARK For ATMOD Terminations.”
