fbpx
17.8 C
Sydney
Friday, March 29, 2024

Buy now

  • HikVision ANPR
  • ID500014-HID-INTERCOM-26.02.2024-728x90
  • HID
HomeArticlesTakex Quad PB-IN200HF PE Beam

Takex Quad PB-IN200HF PE Beam

TAKEX PB-IN200HF intelligent photoelectric beam is the company’s flagship product and gives end users and integrators a powerful and affordable tool to handle bigger sites. 

The unit is designed to provide line of sight detection with an outdoor range of 200m and an indoor range of 400m. The PB-IN200HF is a completely scalable solution which can offer linear or cross hatch protection over any distance or height. It’s immune to white light sources up to 50,000LUX and has extremely high immunity to RFI & EMI. Importantly, the PB-IN200HF carries CE, UL and S.C.E.C. approval.

The PB-IN200HF benefits from the fact Takex has more than 50 years experience in developing outdoor detection technology. Takex PIRs and PE beams provide long and dependable service, even in the most demanding of environments. The company’s outdoor sensor products are specified by police, military and royal institutions across the globe. 

“Takex outdoor photoelectric beams have an arrival distance which is 10x greater than the recommended protection distance…and our technology also allows the Takex product to perform even when there is only 2 per cent reception of Infrared signal.”

While false alarms are often an issue in challenging external environments, there are various unique features offered by Takex which combat false alarms. The first thing is beam strength. All Takex outdoor photoelectric beams have an arrival distance which is 10x greater than the recommended protection distance, ensuring trouble free operation in a variety of conditions.

Next there double pulse modulation. Takex has a unique coupling of a double pulse modulated signal transmitted to a receiver with a phase lock loop circuit ensures that beams will effectively ignore any form of interference by way of bright light or IR flooding. 

This technology also allows the Takex product to perform even when there is only 2 per cent reception of Infrared signal. The PB-IN200HF is also AND-gated and this helps prevent false alarms caused by falling leaves, birds and debris. 

Other features include automatic gain control – the PB-IN200HF automatically adjusts the sensitivity margin during poor weather conditions. It’s fitted with an output which will trigger when the reception at the receiver drops below 20 per cent. This feature provides early warning that the sensor is becoming covered in snow, ice or is being subject to extreme weather conditions. This output also serves as a warning that grass or branches are growing in the path of the sensor.

A hot topic at the moment is video verification and Takex takes this into account. Takex manufactures camera housings which can be fitted on the tops of its beam towers to allow for video verification requirements. The company offers bespoke protection for any situation. If video verification is required, the range of products will fit into any application.  

In terms of new releases, the Takex PXB range is modelled off the benchmark PB-IN200HF. The improvements are IP65 rating, with unique fabric venting system, high Contrast internal casings for easy identification of TX and RX units from 200m or more, improved visual sight (Aiming tool), and increased up & down aiming to -+20°.

The PXB also has wireless, an automatic alignment tool, allowing for effortless one man installation, a widened beam pitch and beam width to drastically reduce any risk of false alarms caused by falling braches, large birds or snow. The new unit will also have super low current consumption of only 34mA for the 200m version.

Fact file:

Infrared Beam Wavelength: 940nm 

Protection Distance Outdoors: 200m 

Protection Distance Indoors: 400m 

Response Time: 50-700msec

Reset: Approx. 1.5 secs. 

Memory LED: Red Pulsing at Alarm

Manual Reset: By Auxilliary Switch

Auto Reset:55 to 60mins. 

Lens Adjustment Vertical: 10° 

Lens Adjustment Horizontal: 90° 

Supply Power: 10 to 30VDC 

 

“Takex manufactures camera housings which can be fitted on the tops of its beam towers to allow for video verification requirements. The company offers bespoke protection for any situation. If video verification is required, the range of products will fit into any application.”

AUTHOR

SEN News
SEN Newshttps://sen.news
Security & Electronics Networks - Leading the Security Industry with News and Latest Events. Providing information and pre-release updates on the latest tech and bringing it all to you daily. SEN News has been in print for over 20 years and has grown strong as a worldwide resource in digital media.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related Articles

TODAYS WEATHER

17.8 C
Sydney
17 C
Canberra
27.7 C
Darwin
15.5 C
Hobart
20.9 C
Perth
20.8 C
Brisbane
12.9 C
Auckland
15 C
Melbourne

RECOMMENDED

- Advertisement -

POLL

RECOMMENDED