Enforcer Systems E200CPM Fogging Solution From LSC.
Enforcer Systems E200CPM Fogging Solution – Australia’s Enforcer Systems E200CPM is a powerful wired fogging solution that integrates with alarm or access control systems and offers coverage of 200 square metres, or 2 activations of 100 square metres.
Triggered by intrusion, Enforcer Systems E200CPM delivers a dense emission from an easily replaceable food grade compressed particle module, which burns at a high rate to obscure vision, repel intruders and protect valuable assets in the protected area.
The Enforcer Systems E200CPM range contains a 360-degree motion sensor within the unit. The motion detector has a spherical lens that can provide 360-degree detection and features a temperature compensation and anti-photometric detection circuit.
Designed to be connected to an alarm or access control panel with battery backup power for redundancy, the 12V DC E200CPM has no heating elements onboard, so there’s no heat build-up and discolouring of the unit or its surrounds.
The unit is managed by a microcontroller featuring a high-performance ARM Cortex MO+ 32-bit RISC processor operating at up to 64MHz.
This is a high-level integration MCU that incorporates a memory protection unit (MPU), high speed embedded memories for flash and SRAM.
This is a low current devices with 4 x high current main outputs (Max 5A each during operation) and 3 x high current sub outputs (Max 5A each during operation). There’s an integrated communications channel, a 7-channel controller with mapping, 12-bit, ADC (up to 16 external channels), up to 59 fast I/Os, clock management, 2 watchdog circuits and ISO 9000 ratings.
There are 2 modes (normal running and service), 6 custom dip switch settings for scalable solutions, multiple flexible inputs (primary-trigger, arm, Sec-trigger1, Sec-trigger2, supervision on-board (tamper, service, trouble) visual and audible output (strobe/siren), dedicated systems outputs on-board (system on, system activation, system armed, service), service reset switch (built-in), and 23-hour duress/panic (double poll terminals).
Melbourne-based Enforcer Systems was founded in 1991, and the team is committed to the development of pro-active alarm systems that not only detect and record intrusion events but effectively stop intruders. You can learn more about Enforcer Systems here, contact Australia distributor LSC here, or read more SEN news here.
“Enforcer Systems E200CPM Fogging Solution From LSC.”
