New Jack Fuse IPEC Enclosure Extends Electronic Break Glass And Safety Call Points Outdoors.
New Jack Fuse IPEC Enclosure – Jack Fuse will give SAGE visitors a first look at its new IP-rated enclosure (IPEC), designed to extend the installation of its Electronic Break Glass, Safety Call Point and Lodestar products into outdoor and wet environments.
The Jack Fuse IPEC provides a protected mounting and termination arrangement for the company’s indoor electronic security peripherals. The enclosure incorporates threaded cable entries on the top, bottom and rear to accept conduit or cable glands, allowing cabling to be brought into the housing from different directions.
Indoor devices, outdoor duty
The same Jack Fuse peripherals, now for wet and exposed sites
The IPEC wraps the existing indoor units in a sealed, IP-rated housing, so one product family covers inside and outside.
Fits inside
Electronic Break GlassEmergency door release
Safety Call PointDuress and assistance
LodestarAlarm indicator
Jack Fuse IPEC
Goes where
External locationsExposed to the weather
Wash-down areasHosed or cleaned in place
Wet industrialPlant and process areas
Threaded entries top, bottom and rearConduit or cable glandsWater diversion channelIP rating number: not stated
Source. Compatible products, cable entries, water management and target environments as reported by SEN. Device descriptions are SEN context. The drawing is a schematic, not the actual product: entry positions and water paths are illustrative. Jack Fuse has not published a specific IP rating in this announcement.
A water diversion channel, sealed mounting holes and lift-up cover are designed to manage moisture around the enclosure. An internal dress plate provides mounting points for Jack Fuse products while concealing cable slack, joins and terminations behind the user interface.
The large transparent cover provides a physical barrier around the Electronic Break Glass and Safety Call Point while keeping the devices visible for identification. It also helps protect against accidental activation and direct exposure to environmental conditions.
The IPEC allows the same Jack Fuse electronic peripherals to be used in applications where the original indoor mounting arrangement would not be suitable, including external locations, wash-down areas and wet industrial environments.
The enclosure is designed as an integrated mounting and cable management system rather than simply a protective cover, with the enclosure, cable entries and internal dress plate forming a single installation arrangement.
Jack Fuse IPEC Features
Jack Fuse IPEC · feature scan
A mounting and cable system, not just a cover
EBGSCPLODESTAR
Lift-up coverDevice and dress plateSealed enclosure body
SCAN8 features · IPEC overview
Source. Features as reported by SEN. Callout positions are indicative. Product shown with an Electronic Break Glass fitted.Discover Jack Fuse
Jack Fuse will demonstrate the IPEC on Stand 10 at SAGE on November 19 at Hotel Realm in Canberra from 9am to 4pm – you can register for SAGE here or read more SEN news here.
Security & Government Expo
SAGE26
Thu 19 Nov 2026 · Hotel Realm, Canberra
Jack FuseSTAND 10IPEC first look
Free entry · register online
SAGE 2026 · Thu 19 Nov · 9am–4pm
Get hands-on with the IPEC at SAGE, Stand 10
Jack Fuse is showing the IPEC for the first time at the Security & Government Expo, Hotel Realm, Canberra. Registration is free and covers the expo floor and ASIS ACT seminars.
Registration opens in a new tab. Times are Canberra (AEDT). Calendar reminder fires the day before.
“New Jack Fuse IPEC Enclosure Extends Electronic Break Glass And Safety Call Points Outdoors.”
New Jack Fuse IPEC Enclosure
”
Join the conversation
What’s your read on this?
SEN readers are the people doing the work — installers, integrators, engineers, specifiers and end users. If you’ve got hands-on experience, a correction, or a view worth arguing, put it below.
Security & Electronics Networks - Leading the Security Industry with News and Latest Events. Providing information and pre-release updates on the latest tech and bringing it all to you daily. SEN News has been in print for over 20 years and has grown strong as a worldwide resource in digital media.
Milestone Systems Appoints Peter Bartzios Key Account Manager South Pacific.Milestone Systems Appoints Peter Bartzios - Milestone Systems has appointed...
ASIAL Awards Night Celebrates Industry's Highest Achievers In Melbourne.ASIAL Awards Night Celebrates Industry's Highest Achievers - Organised by the...
EliteAlarms Expanding Global Reach With New Zealand Designed And Manufactured Security Platform Coming To SAGE In Canberra.EliteAlarms Expands Global...
